The Best Vacuum Pump Oil Low Viscosity

0
528 reviews analysed

1. Robinair Premium High Viscosity Low Moisture Vacuum Pump Oil, Quart (2 Pack)

Robinair Premium High Viscosity Low Moisture Vacuum Pump Oil, Quart (2 Pack)

Feature

Description

Robinair’s oil is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair oil is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time. Robinair oil has a lower moisture content than other oils, thanks to our special packaging and handling procedures. Moisture degrades the oil’s purity, thinning it and reducing the pump’s ability to reach a deep vacuum.

2. Robinair Premium High Viscosity Low Moisture Vacuum Pump Oil, Quart (3 Pack)

Robinair Premium High Viscosity Low Moisture Vacuum Pump Oil, Quart (3 Pack)

Feature

Description

Robinair’s oil is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair oil is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time. Robinair oil has a lower moisture content than other oils, thanks to our special packaging and handling procedures. Moisture degrades the oil’s purity, thinning it and reducing the pump’s ability to reach a deep vacuum.

3. Welch Vacuum 1407K-15 Duo Seal Pump Oil, 1 gal

Welch Vacuum 1407K-15 Duo Seal Pump Oil, 1 gal

Feature

4. Uniweld U5VP2 5.5 CFM 2 Stage Dual Voltage Vacuum Pump

Uniweld U5VP2 5.5 CFM 2 Stage Dual Voltage Vacuum Pump

Feature

Description

Uniweld’s U5VP2 Two Stage Vacuum Pump is for deep vacuum service on automotive, appliances, residential, and commercial HVAC/R systems. Features include: 5. 5 CFM 2-stage rotary vane design, 1/2 H. P. motor with dual voltage 110V/220V – 50/60 Hz power selector switch, factory micron rating of 15 microns, 1/4″ and 3/8″ male flare dual intake fittings with tethered caps, center mounted handle for balance, powerful low decibel fan cooled motor, heat dispersing motor fins, wide and stable metal base with non-skid rubber feet for durability and vibration control, wide mouth oil fill port and pump exhaust, 11. 1 oz. oil capacity, large sight glass for easy oil monitoring, an easy access oil drain plug.

5. TSI Supercool V128-4CP Super Premium Synthetic Vacuum Pump Oil – 1 Gallon, 4 Pack

TSI Supercool V128-4CP Super Premium Synthetic Vacuum Pump Oil - 1 Gallon, 4 Pack

Feature

Description

Size:1 Gallon, (4 Pack)

Compatible with all vacuum pump brands Provides Low Volatility and high resistance to oxidation Synthetic oil improves performance and extends life of vacuum pumps.

6. Cole-Parmer CP 500 Vacuum Pump Oil, 56 CST, 1 gal

Cole-Parmer CP 500 Vacuum Pump Oil, 56 CST, 1 gal

Feature

7. Welch Vacuum 1407K-11 Duo Seal Oil, 1 Quart

Welch Vacuum 1407K-11 Duo Seal Oil, 1 Quart

Feature

8. Electric Oil Extractor Pump Auto Car Oil Fluid Liquid Extractor Scavenge Exchange Transfer Pump Kit Oil Change Pump 12V 60w

Electric Oil Extractor Pump Auto Car Oil Fluid Liquid Extractor Scavenge Exchange Transfer Pump Kit Oil Change Pump 12V 60w

Feature

Description

Specifications:
Rated Voltage: DC 12V
Rated Power: 60W
Maximum Pressure: Max. 0.8MPA
Maximum Flow: 5L/min
Pump Diameter: Approx. 4.8cm / 1.89″”
Length: Approx. 14.5cm / 5.7″”
Outlet Pipe Size(Dia.*L): Approx. 11mm*140cm / 0.43″” * 55″”
Inlet Pipe Diameter: Approx. 8mm & 6 mm / 0.31″” & 0.24″”
Inlet Pipe Length: Approx. 100cm / 39.37″”
Cable Length: Approx. 30cm / 11.8″”
Clips Length: Approx. 8cm / 3.15″”

How to use:
1. Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.
2. Connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal.
3. Open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.)
4. After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean.
5. If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.

Package Inculded:
1 x oil pump
1 x 11mm outlet pipe
1 x 8mm inlet pipe
1 x 6mm inlet pipe
2 x clips

9. Krytox by Chemours D12339138 Krytox 1506 Vacuum Pump Oil 1 kg/2.2 lb. Bottle – Low Viscosity

Krytox by Chemours D12339138 Krytox 1506 Vacuum Pump Oil 1 kg/2.2 lb. Bottle - Low Viscosity

Feature

10. Vacuum Pump Oil, 1 qt. Container Size- Pack of 5

Vacuum Pump Oil, 1 qt. Container Size- Pack of 5

Feature

Description

Mobil Vacuum Pump Oil 100 delivers a blend of high-quality white oil with low volatility characteristics, specifically developed for the lubrication of vacuum pumps. It features a high degree of chemical stability to resist oxidation, sludge, and deposits, and helps to provide long service life with maintained viscosity. It also offers good demulsibility to separate readily from water, promoting water removal and preventing rust and corrosion. Use in vacuum pumps that require a high vacuum.

Features:

  • Viscosity Index-68
  • Flash Point-450 Degrees F
  • Pour Point-15 Degrees C
  • Container Type-Bottle
  • Timken OK Load-Not Specified
  • Application-Most Vacuum Pumps where High Vacuum is Required
  • Four-Ball Wear-Not Specified
  • Conclusion

    By our suggestions above, we hope that you can found Vacuum Pump Oil Low Viscosity for you.Please don’t forget to share your experience by comment in this post. Thank you!

    Home Previews
    Logo
    Enable registration in settings - general