We spent many hours on research to finding otc cooling pressure tester, reading product features, product specifications for this guide. For those of you who wish to the best otc cooling pressure tester, you should not miss this article. otc cooling pressure tester coming in a variety of types but also different price range. The following is the top 10 otc cooling pressure tester by our suggestions
838 reviews analysed
1. OTC (7991) Cooling System Pressure Tester
The OTC 7991, now you can pressure test the cooling system on most cars, light commercial trucks, motorcycles, and even marine applications. The testers universal fit eliminates the need for multiple adapters. Will not work on Saturn and Kia cars or Jeep with the plastic reservoir.
2. OTC (3054E) Noid Lite/IAC Test Kit
- Simplest method for eliminating the EFI system or idle air control as possible faults on no-start vehicles
- Disconnect the fuel injectors, plug in a Noid Lite, and crank the engine
- A flashing light indicates normal pulsing voltage
- Expanded set of eight specific Noid Lites covers: GM PFI, Ford TBI, Geo TBI, Bosch PFI, GM TBI, GM SCPI, and now new applications of Bosch 2 and Multec 2, plus two GM IAC testers (flat and square four connector applications) with red and green LEDs
- Includes a molded plastic case and harness extension that allows for convenient remote viewing from the driver’s seat
3. OTC 4712 Euro Radio Removal Tool Kit
Includes the popular tools needed to remove the radio from the dash on the following European vehicles: BMW VW Audi and Mercedes-Benz. Easily removes the radio without damaging the radio or the dash panel.
4. OTC Tools 7222 Injector Tube Remover/Installer
The OTC 7222 Injector Tube Remover/Installer removes injector tubes for service and re-installs. Fits GM 6.6L Duramax Diesel, 2001 to present. Similar to J-45910.
5. OTC 4493 Angle-Tip Relay Plier
6. OTC 5953 Dual End Wire Holder
- Holds wire and connectors solidly during soldering or other wire service
- Unique design allows connection to be held firmly on both sides with infinite adjustability
- Insulated clips act as heat sinks to protect shrink tubing or other sensitive parts from heat
- Crafted from high-grade materials to ensure quality performance over the lifetime of the tool
- One year limited warranty
OTC’s Dual End Wire Holder holds wire and connectors solidly during soldering or other wire service. Unique design allows connection to be held firmly on both sides with infinite adjustability. Insulated clips act as heat sinks to protect shrink tubing or other sensitive parts from heat. Crafted from high-grade materials to ensure quality performance over the lifetime of the tool. One year limited warranty. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.
7. OTC 6073 A/C Disconnect Tool for Toyota
A/C Line Disconnect Tool for Toyota. Used to release the plastic quick-connect fittings on the high and low pressure air conditioning lines at the evaporator.
8. OTC 6087 Injection Pump Wrench Set for GM
- Use to loosen or tighten injection pump retaining bolts whenever pump timing adjustment or pump service is required
- Two specially bent wrenches are needed due to the location of the throttle cruise control T.V. cable bracket cooling system crossover pipe and bracket and the thermostat housing
- Wrenches are 15 mm 12-point double box-end type
- Services 1996-2000 GM full-size 2 and 4 wheel drive trucks vans and Suburban’s with 6.5L diesel engine
OTC Injection Pump Wrench Set for GM Use to loosen or tighten injection pump retaining bolts whenever pump timing adjustment or pump service is required. Services 1996-2000 GM full-size 2- and 4-wheel drive trucks vans and Suburban’s with 6.5L diesel engine. Two specially bent wrenches are needed due to the location of the throttle cruise control T.V. cable bracket cooling system crossover pipe and bracket and the thermostat housing. Wrenches are 15 mm, 12-point, double box-end type.
9. OTC 4715 Deluxe European Radio Removal Tool Kit – 18 Piece
- Deluxe 18 piece tool kit to safely remove radios on many American made and European vehicles
- Kit comes in a locking, durable nylon holding pouch
- Covers Audi, BMW, Blaupunkt, Becker, Ford, Grundig, Mercedes-Benz, Opel, Porsche, Skoda and VW
- Tools allow for quick and easy removal of the radio from the instrument panel
Quickly and easily removes the radio from the instrument panel on many USA and most European made vehicles without damaging either the radio or the instrument panel. Replacement Parts: 4715-1 Removal Keys (4 pieces) Audi, Becker, Mercedes-Benz, VW; 4715-2 Removal Keys (2 pieces) Becker, Mercedes-Benz, Porsche; 4715-3 Removal Keys (2 pieces) VW; 4715-4 Removal Keys (2 pieces) Skoda; 4715-5 Removal Keys (2 pieces) Becker; 4715-6 Pentagon Wrench BMW; 4715-7 Bent U-hook (2 pieces) Blaupunkt; 4715-8 U-hook (2 pieces) Audi, Blaupunkt, Ford, Grundig, VW; 4715-9 Allen Hex Wrench BMW, Opel.
10. OTC 7740 Micro Release Tool
OTC Micro Release Tool Micro-style terminal release tool. It works on various domestic and import vehicles.
By our suggestions above, we hope that you can found Otc Cooling Pressure Tester for you.Please don’t forget to share your experience by comment in this post. Thank you!