The Best Nutribullet Cupholder Expander

0

Finding your suitable readers for nutribullet cupholder expander is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for nutribullet cupholder expander including detail information and customer reviews. Let’s find out which is your favorite one.

735 reviews analysed

1. SMART KUP Car Cup Holder for Hydro Flasks 32 oz and 40 oz, Nalgene 32 oz and Other Large Bottles up to 3.8 inches Wide. 3 inch Upper Cup Will Hold Your Items Unlike The competitors.Black

SMART KUP Car Cup Holder for Hydro Flasks 32 oz and 40 oz, Nalgene 32 oz and Other Large Bottles up to 3.8 inches Wide. 3 inch Upper Cup Will Hold Your Items Unlike The competitors.Black

Feature

Description

Color:Black

Smart Kup is a car cup holder designed to fit the 32/40 oz. Hydro Flask, 40 oz. 50/50 Flask, 32 oz. wide mouth Nalgene bottle 32 oz Gatorades along with soft drink cups and water bottles up to 3.8 inches in diameter. Please inquire about other brands and types before ordering. **IMPORTANT** Similar holders have upper cups only 2 INCHES TALL…which makes the bottle or container prone to falling out on turns or quick driving movements. The Smart Kup has a 3 inch cup to hold your container and should not fall out on turns or quick movements while driving.

2. Swigzy Car Cup Holder Expander Adapter with Adjustable Base – Rubber Tabs Hold Most 32 – 40 oz Bottles and Large Cups

Swigzy Car Cup Holder Expander Adapter with Adjustable Base - Rubber Tabs Hold Most 32 - 40 oz Bottles and Large Cups

Feature

3. Gadjit Cup Keeper Adapter (2 Pk) expands Narrow Car Cup Holders from 2.5-3" up to 3.25" in Diameter to Hold Mugs, Convenience Store Cups, Water + Soda Bottles up to 3.25" Wide and 8-10" Tall (Black)

Gadjit Cup Keeper Adapter (2 Pk) expands Narrow Car Cup Holders from 2.5-3" up to 3.25" in Diameter to Hold Mugs, Convenience Store Cups, Water + Soda Bottles up to 3.25" Wide and 8-10" Tall (Black)

Feature

Description

Gadjit Cup Keeper Adapter expands Car Cup Holder to hold Mugs, Convenience Store Cups, Water + Soda Bottles with bases up to 3.25″ and up to 8-10″ tall

Cup holder too narrow for your to-go beverage? Cup Keeper Adapter EXPANDS your vehicle’s cup holder so it can hold mugs, convenience store cups, & water and soda bottles with bases up to 3.25” and up to 8-10” tall.

No installation needed. Simply place in your cup holder and set your mug, cup, or bottle in Cup Keeper. Work in cars, trucks, RVs, golf carts. Portable, too. It goes where you go. Durable, Dishwasher-safe.

Use with Travel Mugs, Store Coffee Cups, Water Bottles, Store Soda Cups with bases up to 3.25” and up to 8-10” tall. WARNING–Too tall beverage containers may wobble and tip over.

Cup Keeper Dimensions
Top to Bottom – 6.31”
Top Part Dimension – 3.6” Width, 3.25” Height. The Top Part sits above the cup holder. Drink containers sit in the Top Part.
Bottom Part Dimension – 2.5” Width, 2.5” Height. The Bottom Part sits into the cup holder.
WILL THIS FIT MY CURRENT CUP HOLDER?
To ensure a good fit – Measure the diameter and depth of your existing cup holder. Product Dimensions: Height from top to bottom – 5.25”. Top Holder Dimension: 3.6” at the top rim, 3.375” at lower rim. Bottom Base Dimension: 2.5” Height, 2.5” Diameter.

4. BottlePro – Cup Holder Adapter for 32/40 Ounce Hydro Flasks, 32 Ounce Nalgenes, 36 Ounce Yeti Ramblers, 32/40 Ounce Klean Kanteens, and Other Large Bottles. Adjustable and Extendable. Version 2.

BottlePro - Cup Holder Adapter for 32/40 Ounce Hydro Flasks, 32 Ounce Nalgenes, 36 Ounce Yeti Ramblers, 32/40 Ounce Klean Kanteens, and Other Large Bottles. Adjustable and Extendable. Version 2.

Feature

5. STAND-Bi Car Cup Holder Expander – Perfectly Fits Your Car’s Cupholder – Holds Large Water Bottles and Cups – Also Holds Your Phone Made Only in USA

STAND-Bi Car Cup Holder Expander – Perfectly Fits Your Car’s Cupholder – Holds Large Water Bottles and Cups – Also Holds Your Phone Made Only in USA

Feature

6. Essentially Engineered Car Cup Holder Expander Adapter with Adjustable Base for Yeti Ramblers, Thermo, Hydro Flask – Hold Large Bottles, Cups and Mugs 32-40 oz

Essentially Engineered Car Cup Holder Expander Adapter with Adjustable Base for Yeti Ramblers, Thermo, Hydro Flask - Hold Large Bottles, Cups and Mugs 32-40 oz

Feature

Description

The Essentially Engineered vehicle cup holder adapter is specifically designed for a broad range of fitment. This adapter fits perfectly in most vehicles, RV’s, boats, golf carts, motorcycles, etc. However, due to the large variety of vehicle cup holders, in certain applications this adapter will not fit. We ask that you please view the dimension photo and compare it to your specific application. Cup holders that are located in vehicle doors, have anything directly above them, are located on a steep angle, or have covers may not work with this design. We offer 100%, full product refunds due to the large variety of fitment.

For those that are sure the product fits, this is the best design available on the market. The top portion includes a silicon gasket with four rubber tabs to securely hold 3.4”-3.8” bottles. This ensures the snuggest fit available on the market and still allows the bottle to be easily removed. The bottom, extender portion has three expandable and retractable legs from 2.5”-3.75”. These legs are coated with a friction resistant rubber to ensure that the adapter will not slip from the cup holder.

Installation is as easy as it gets; simply hold the base and twist the top clockwise to expand the legs. Once the legs are expanded enough to touch the cup holder walls, insert the adapter into the cup holder. Then, twist the top another ¼ turn to ensure a snug fit (be careful not to over tighten). Once installed, sharp corners will not spill your drink anymore. To remove, twist the top counterclockwise.

This adaptor will fit the specific bottles listed below, and many more:

Gatorade – 32oz

Yeti/Rtic Ramblers – 20oz, 26oz, 30oz, & 36oz

Nalgene – 30oz, 32oz, 38oz, & 40oz

Hydroflask – 32oz & 40oz

Camelbak – 32oz & 40oz

Klean Kanteen – 40oz

This list only scratches the surface of what can actually fit. It also accepts a variety of fast food cups, coffee mugs, and more!

7. Smart Flask Car Cup Adapter with New Removable Sizing Ring and Fitting Sleeve, Fits Our 32oz, Hydro Flask 32 & 40oz, Nalgene 32oz and Most Other 32 and 40oz Flasks and Bottles. Measure to be Sure!

Smart Flask Car Cup Adapter with New Removable Sizing Ring and Fitting Sleeve, Fits Our 32oz, Hydro Flask 32 & 40oz, Nalgene 32oz and Most Other 32 and 40oz Flasks and Bottles. Measure to be Sure!

Feature

8. Gadjit CUP KEEPER 2.0 (2 PK) Cup Holder Adapter w/Adjustable Base For Hydro Flasks 18 21 24 oz, Yeti Tumbler 20 & 30 oz, Coffee & Travel Mugs 28 oz, Fits up to 3.25" diameters Black

Gadjit CUP KEEPER 2.0 (2 PK) Cup Holder Adapter w/Adjustable Base For Hydro Flasks 18 21 24 oz, Yeti Tumbler 20 & 30 oz, Coffee & Travel Mugs 28 oz, Fits up to 3.25" diameters Black

Feature

Description

Gadjit CUP KEEPER 2.0 Cup Holder Adapter w/ Adjustable Base Band For Hydro Flasks 18 21 24 oz, Yeti Tumbler 20 & 30 oz, Coffee & Travel Mugs 28 oz, Convenience Store Cups 48 oz, 1-liter Bottle

EXPAND CAR BEVERAGE HOLDERS to 3.25″ in DIAMETER – NEW Gadjit Cup Keeper 2.0 with Adjustable-fit Beverage Band Expands your Car Cup Holder to accommodate Mugs and Convenience Store Cups up to 3.25” wide and Water & Soda Bottles up to 1 liter.

NEW ADJUSTABLE FIT – The Silicone Compression Beverage Band allows you to adjust the diameter of Cup Keeper 2.0’s base for a snug fit in your vehicle’s drink holder. Use in cars, trucks, RVs, golf carts, tractors and more. Portable — it goes where you go.

WILL IT FIT MY BEVERAGE? It fits Hydro Flask 18 oz, 21 oz, 24 oz, Yeti 20 oz Tumbler, 30 oz Tumbler, 12oz JR, 12 oz Bottle, 18 oz Bottle. — Coffee Shop Cups up to 28 oz, Gas Station Soda Fountain Cups up to 48 oz, and Water Bottles up to 1 liter (32 oz).

Will NOT fit large the Yeti Tumblers over 30 oz, the Hydro Flasks 32 oz and 40 oz. or any of the Nalgene Water Bottles.

WILL THIS FIT MY CUP HOLDER? To ensure a good fit – PLEASE MEASURE the diameter and depth of your existing cup holder. Cup Keeper 2.0 will fit if your cup holder is 2.5-3.5″ in diameter and is about 2″ deep. Slide the beverage band up or down the base to adjust for a snug fit and wobble-free beverages. If your cup holder is 2.5” wide, you may not need to use the enclosed beverage band. If it’s wider than 2.5” using the beverage band will create a snugger and more stable fit.

IF your cup holder is larger than 3.5″, Cup Keeper 2.0 will fit but may not fill the entire diameter snuggly, so please measure before you buy! We offer a 30-day money-back guarantee so that you’re not stuck with something that won’t work. PROUDLY MADE IN THE USA.

9. Gadjit Cup Keeper Adapter (2 Pk) expands Narrow Car Cup Holders from 2.5-3" up to 3.25" in Diameter to Hold Mugs, Convenience Store Cups, Water + Soda Bottles up to 3.25" Wide and 8-10" Tall (Gray)

Gadjit Cup Keeper Adapter (2 Pk) expands Narrow Car Cup Holders from 2.5-3" up to 3.25" in Diameter to Hold Mugs, Convenience Store Cups, Water + Soda Bottles up to 3.25" Wide and 8-10" Tall (Gray)

Feature

Description

Gadjit Cup Keeper Adapter expands Car Cup Holder ½” to hold Regular Mugs, Convenience Store Cups, Water + Soda Bottles with bases up to 3.25″ in diameter and up to 8-10″ high

Many car cup holders are only 2.5-3″ in Diameter. Cup Keeper Adapter EXPANDS your vehicle’s cup holder so it can hold regular sized mugs, larger convenience store cups, & water and soda bottles with bases up to 3.25” wide and up to 8-10” high.

No installation needed. Simply place in your cup holder and set your mug, cup, or bottle in Cup Keeper. Work in cars, trucks, RVs, golf carts. Portable, too. It goes where you go. Durable, Dishwasher-safe.

Use with Travel Mugs, Store Coffee Cups, Water Bottles, Store Soda Cups with bases up to 3.25” and up to 8-10” tall. WARNING–Too tall beverage containers may wobble and tip over.

Cup Keeper Dimensions
Top to Bottom – 6.31”
Top Part Dimension – 3.6” Width, 3.25” Height. The Top Part sits above the cup holder. Drink containers sit in the Top Part.
Bottom Part Dimension – 2.5” Width, 2.5” Height. The Bottom Part sits into the cup holder.
WILL THIS FIT MY CURRENT CUP HOLDER?
To ensure a good fit – Measure the diameter and depth of your existing cup holder. Product Dimensions: Height from top to bottom – 5.25”. Top Holder Dimension: 3.6” at the top rim, 3.375” at lower rim. Bottom Base Dimension: 2.5” Height, 2.5” Diameter.

10. Hopkins RETRO-CHA Go Gear Retro Cupholder, (Charcoal)

Hopkins RETRO-CHA Go Gear Retro Cupholder, (Charcoal)

Feature

Description

For all of us who are constantly on the go, staying organized turns out to be very difficult. Go Gear, by Hopkins Manufacturing, provides an innovative, high quality line of storage and organization solutions to help you manage your clutter. Whether it’s locating a spot to hold your mobile phone or keeping bags of groceries from rolling around in the trunk, Go Gear provides the right solution. The Go Gear Retro Cupholder is designed to instantly convert built-in cupholders to adjustable locking drink holders.

Conclusion

By our suggestions above, we hope that you can found Nutribullet Cupholder Expander for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general