Top 10 Heating Elements Stiebel Eltron

The Stiebel Eltron Tempra 36 Plus Tankless Water Heater features exclusive Advanced Flow Control™ German patented technology invented by Stiebel Eltron to automatically maintain water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity to ensure that hot showers will never be interrupted. Tempra 36 Plus will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE – ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 36 KW/27 KW; Min. recommended household electric service 300 A; Amperage draw: 150 A/132 A; Number and min. recommended size of circuit breakers: 3 x 50 A (DP); Number of runs and min. recommended wire size (copper): 3 x 8/2 AWG; Max. temperature rises: 92 F/92 F at 1.50 GPM, 92 F/82 F at 2.25 GPM, 82 F/61 F at 3.00 GPM, 55 F/41 F at 4.50 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l/min; Weight: 19 lb/8.6 kg; Nominal water volume: 0.39 gal/1.5l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4″ NPT.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for one bathroom residences in climates where incoming water temperature is 67°F and above. This model is well suited for heating nearly 1.5 gallons per minute to 105°F at that inlet temperature, which is the equivalent of one water saver shower head. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 8 requires a minimum 100 amp electrical panel for installation with (1) 40 amp double pole breaker connected to (1) set of #8 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product Description

The Stiebel Eltron Mini tankless water heaters are designed for installation at the point-of-use. The Mini heats water instantaneously as it flows through the unit. Stand-by heat-losses are completely eliminated. The efficient heating elements are controlled by a simple flow switch. Additionally, all Mini water heaters are equipped with a safety high-limit with manual reset. Made in the USA.

From the Manufacturer

The Stiebel Eltron Mini™ tankless water heaters are designed for installation at the point-of-use. The Mini™ heats water instantaneously as it flows through the unit. Stand-by heat-losses are completely eliminated. The efficient heating elements are controlled by a simple flow switch. Additionally, all Mini™ water heaters are equipped with a safety high-limit with manual reset. Made in the USA.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with (2) 40 amp double pole breakers connected to (2) sets of #8 awg wire. Plumbing connections are 3/4″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product Description

This Watts Series THW Tankless water heater valves are designed to simplify the installation and maintenance of tankless water heaters They replace up to 18 fittings and 16 connectors used in typical tankless water heater installations Available in two valve sets for both hot and cold water with 3/4-inch female threaded union brass fittings. No additional adapters required

From the Manufacturer

This Watts Series THW Tankless water heater valves are designed to simplify the installation and maintenance of tankless water heaters They replace up to 18 fittings and 16 connectors used in typical tankless water heater installations Available in two valve sets for both hot and cold water with 3/4-inch female threaded union brass fittings

The ECO line by Marey is designed using SMART Technology. It is the only one in the market that does not accumulate sediments, as the water never touches the heating element! The 220V ECO110 by Marey provides 11kW of power, being the perfect solution for 2 points of use in Southern areas (a shower and a sink). This unit provides 28°F increase at 3.0 GPM, allowing you to have a shower and a sink running simultaneously in hot climates. The 220V ECO110 reaches 56 °F at 1.5GPM for hot water output at one point of use at time. In colder regions, the 220V ECO110 is suitable to provide hot water for a single point of use such as a sink. Marey´s 220V ECO110 is ETL approved. It performs best in the US Southern regions where the incoming water temperature is above 70°F. This unit must be installed no more than 40 feet from the intended point of use. The complete ECO line by Marey is designed with corrosion resistant heating elements which reduce hard water build up from chlorine and calcium.

Product Description

Stiebel Eltron SHC series mini-tank electric water heater is ideal for office buildings, stores, malls, warehouses, food trucks, restaurants, gas stations, schools, hotels/motels, commercial, industrial and institutional. residential: bathroom sinks, kitchen sinks, rvs, cabins/cottages, low flow showers and laundry areas. An SHC mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen applications. Plumbed with cold water and used as a stand-alone supply of hot water, or plumbed with hot water from a remote tank to minimize delays, an SHC always delivers hot water when needed. By put – ting hot water right where it is used, pipe runs are minimized and water and energy use reduced. The smaller tank coupled with superb insulation reduces stand-by losses especially when compared with larger tank-type water heaters. With its flat back and included bracket an SHC easily mounts right under or near the sink. Once filled with water it simply plugs into a 120 V outlet. With only an 11 amp current draw, no special wiring is required. Lightweight and compact, the SHC saves space, quickly provides hot water right where it is needed. Certified to ANSI/UL Std. 174 Conforms to CAN/CSA Std. 22.2 No. 110. Tested and certified by WQA against NSF/ANSI 372 for lead free compliance. ISO 9001 certified. Technical Specification: Phase – 60/50 Hz: single; Voltage: 120 V; Wattage: 1300 W; Amperage: 11.3 A; Nominal water volume: 2.65 gal / 10 l; Weight empty: 15.9 lb / 7.2 kg; Height (includes PandT valve): 18-11/16″ / 475 mm; Width: 11″ / 280 mm; Depth: 10-5/8″ / 270 mm; Maximum operating pressure: 150 psi / 10 bar; Maximum adjustable temperature: 140 degrees F / 60 degrees C; Recovery time: 18 minutes; Standby energy loss @ 131°F / 55°C: 0.37 kWh / day; Water connections: black steel -1/2″ NPT.

From the Manufacturer

The SHC Mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen type applications. Why store 30 or more gallons of hot water when 4 gallons or even 2.5 gallons are sufficient for the job? The unit installs right under or near the sink. Lightweight and compact, the SHC mounts to the wall (bracket included).

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications