691 reviews analysed
1. Icstation 12V 7W Flexible Polyimide Heater Plate Adhesive PI Heating Film 25mmx50mm (Pack of 4)
Feature
- Uses polyimide as insulator outside, and the thermo foil as electric heating element inside, formation through high temperature and high pressure heat sealing process
- Extremely thin, lightweight and flexible, polyimide heaters can quickly provide heat to where it is needed widely used in the electronics manufacturing,medical devices,scientific instruments
- Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance
- Equipped with self adhesive can be fixed on the item surface easily, heating films can not control temperature itself.
- Working Voltage: DC 12V, Power: 7W, Film Size: 25 X 50mm/0.98 X 1.97inch(L*W), Maximum Temperature: about 150℃ Ship out by USPS with tracking information and 7-15 days delivery time usually
2. Fuxury 12 inches Heat Seal Closer Impulse Sealer Accessories,2 Wire Elements and 2 Teflon Tapes,Length: 12 inches (300mm), Seal Width: 0.08 inch (2mm)(2 Repair Kits)
Feature
- 【Specifications】Sealing Length: 12 inch (300mm), Seal width: 0.08 inch (2mm).
- 【Used for 12 inch impulse heat sealer】Compatible with Fuxury brand 12 inch Impulse Manual Bag Sealer.
- 【Package Contents】2 wire elements and 2 Teflon Tapes(2 Replacement KIT ).
- 【Original accessories】Pls use original qualified spare parts from Fuxury, to ensure heat sealer reliability and permanence.
- 【Convenient replace】Easy to replace like the video display.
3. PTFE Tape/Teflon Tape for Vacuum, Hand and Impulse Sealers (1/2-inch x 30 feet) – Fits FoodSaver, Seal A Meal, Weston, Cabella’s by IMPRESA
Feature
- 1/2″ wide x 30 foot long Teflon tape / PTFE tape roll with adhesive backing. Fits virtually all FoodSaver, Weston, Cabella’s, Nesco and Seal-A-Meal vacuum sealers, as well as most models of hand / impulse heat sealers
- Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the bag. Old tape causes poor bag sealing and can lead to a broken heating element and a broken sealer
- Tape may be slightly wider and longer than necessary, allowing for broad compatibility. Strip should be replaced when appearing warn, discolored or if sealing isn’t perfect
- Just peel tape from the roll and place on the correct area (you may need to clean the strip location before placing the new piece of tape). Over the wire for vacuum sealers, under the wire for impulse sealers
- Ideal for virtually all FoodSaver models including 4800, 2244, 3240, 4440, 4865, 3880, 3460, 2840, 3840, 3835, 2440, 2450, 2860, 2240, 2840, FM2000, FM2100, GameSaver, Professional, and many more. Great for Weston Pro 2100, 2300 and more. By IMPRESA (TM)
Description
NEW Made in USA
4. 3 Teflon FoodSaver Replacement Strips for Vacuum Sealers – Fits FoodSaver, Rival Seal-A-Meal, Weston, Cabella’s and Nesco Models – Made in the USA
Feature
- Three 18-in long x 0.5″ wide Teflon strips with adhesive backing. Fit virtually all FoodSaver (TM) series, incl. 2000, 3000, 4000, 5000, GameSaver (TM) & Professional, and all Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) models
- Replaces deteriorated or burnt-out Teflon tape / PTFE tape, which is a crucial barrier between the heating element and the bag in your heat sealer machine. Old tape causes poor sealing and can lead to a broken heating element and a broken sealer
- Strips are slightly wider and longer than necessary, allowing you to easily cut them down to the perfect size for your model. Strips should be replaced when they appear warn, discolored or if sealing isn’t perfect
- Ideal for virtually all FoodSaver (TM) models including 4800, 2244, 3240, 4440, 4865, 3880, 3460, 2840, 3840, 3835, 2440, 2450, 2860, 2240, 2840, FM2000, FM2100, GameSaver, Professional, and many more. Great for Weston (TM) Pro 2100, 2300 and more
- Peel and stick backing – easy to apply. Simple-to-follow instructions included. Over the wire for vacuum sealers, under the wire for impulse sealers. Please note: This is an aftermarket replacement product (produced by Impresa Products). Trademark IMPRESA.
Description
(3) 18″ x 0.5″ IMPRESA Teflon strips with adhesive backing. Fit virtually all FoodSaver series, including 2000, 3000, 4000, 5000, GameSaver and Professional, as well as virtually all Weston, Cabella’s, Nesco and Rival Seal-A-Meal models. Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the vacuum bag. Old tape causes poor bag sealing and can lead to a broken heating element and a broken sealer. Strips are slightly wider and longer than necessary, allowing you to easily cut them down to the perfect size for your model. Strips should be replaced when they appear warn, discolored or if sealing isn’t perfect. Peel and stick backing makes our vacuum sealer tape easy to apply. Simple-to-follow instructions included with package. Over the wire for vacuum sealers, under the wire for impulse sealers. Great for Weston Pro 2100, 2300 and more. Perfect piece of the solution when looking for replacements for FoodSaver (TM) parts, FoodSaver (TM) teflon / teflons for FoodSaver (TM) / Food Saver (TM) teflon tape / FoodSaver (TM) teflon tape, Rival Seal A Meal (TM) parts, etc. This is a generic product manufactured and distributed by Impresa Products (TM). This is not a FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM) OEM product and Impresa Products has no affiliation with or endorsement from FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM). Our product is not covered under any FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM) manufacturer’s warranty. The FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) brand names and logos are the registered trademarks of their owners. Any use of the FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) brand names, models or any other related designations are made solely for purposes of describing and illustrating compatibility.
5. RV Water Heater Magnesium Anode Rod Set – 2-Piece Kit Water Heater Anode Rods with PTFE Tape – Compatible with Suburban and Mor-Flo Water Heater Tanks – 9.25" Length ¾" NPT Threads
Feature
- WHAT YOU NEED: If you’re using a water heater tank, you should keep in mind that its interior is always subjected to the corrosive action of oxygen and other elements. In order to prolong its life and save your money and time, we offer the perfect solution!
- SAFETY COMES FIRST: These RV water heater anode rods are made from superior quality, extra-durable magnesium guaranteed to withstand the test of time. Unlike classic aluminum zinc rods, our products are 100% for the entire family!
- COMPATIBILITY: These magnesium anode rods are 9.25” long, come with ¾” NPT threads and are compatible with Suburban and Mor-Flo water tanks. The rods use a 1-1/16 inch socket.
- LONGER LIFE: These water heater magnesium anode rods work better than aluminum ones in attracting corrosive elements, protecting your water heater and prolonging its life span with little to no investment.
- GREAT DEAL PACKAGE: This practical RV water heater kit includes 2 magnesium anode rods and a BONUS PTFE tape, all set for fixing up your water heater tank and optimizing its functionality!
Description
Small part, Big Impact
Are you tired of spending enormous amounts of money and energy with expensive
fixing procedures of your water tank? Would you like to avoid unpleasant and unforeseen
investments when it comes to your water heating sources? You’ve come to the right place!
Why is this product for you?
This 2-piece anode rod set is made from top-quality magnesium which is non-toxic and entirely
safe for the human body! The high absorption rate of corrosive elements makes it a better choice
than aluminum, keeping your water tank in perfect functioning condition for years. Plus, with
a bonus PTFE tape included, the installation process is easy for anyone
Some of the amazing features of this product:
- Set includes: 2 anode rods, 1 PTFE tape;
- Dimensions: 25″ Length ¾” NPT Threads;
- Uses 1-1/16 inch socket;
- Compatible with Suburban and Mor-Flo models;
- Material: magnesium;
- Safe for humans.
Add to cart now and reap all the benefits this RV Water Heater Magnesium Anode Rod Set has to offer!
6. BriskHeat HSTAT101004 XtremeFLEX HSTAT Silicone Rubber Heating Tape With Adjustable Thermostat Controller, W x L: 1 x 48-Inch, 120VAC
Description
Silicone rubber heating tape with adjustable controller, 1″ x 4′ heating tape, 288 watts, 120VAC, thermostat adjustable between 50F to 425F, maximum exposure temperature of 450F, moisture and chemical resistant, 6-foot power cord with plug.
7. 279838 Dryer Heating Element for Whirlpool Kenmore Roper Dryer Heating Element Parts(3977393&3977767&3392519&3387134)3387134, 3977767 Dryer Thermostat Replacement Kit&3977393 ,3392519(2 PCS)Thermal Fuse (Replaces 8565582,AP309425,3398064,3403585)
Feature
- ❤Quality growth: The heating element resistance of the heating element of the 279838 dryer has increased by 25%, the nickel-chromium content has reached 80%, and the thickness of the nickel wire is 0.052 inches. Long heat-resistant life reduces the number of replacements and saves you maintenance costs!
- ❤Compatible brands: suitable for most well-known brands: Whirlpool, Kenmore 80 series Kenmore gas dryer parts model 110, Maytag, KitchenAid, Roper dryer, Crosley, Estate, Amana, Inglis, Admiral, Magic Chef, Jenn- Air.
- ❤Direct replacement models: (part numbers) 279837, 279838, 2438, 279838A, 279838VP, 339094, 3403585, 8856562, AP3094254, W10724237, AH334313, EA334313, 3386651, 694511, 80005, WP3392519VP, 3399693, ER3977767
- ❤Note: The heating element of the 279838 dryer is rated at 5400 watts 240 volts and has 2-5/16″ male terminals. To complete this repair, you will need a 1/4-inch nut driver and a pair of needle-nose pliers .
- ❤Quality assurance: 365 days after sale: no matter what the reason! You are not satisfied, contact us! We can all make resend new or unconditional full refunds. In short, our friendly service will satisfy you!
Description
Package includes:
1 x 279838 dryer heating element
1 x 3977767 dryer thermostat
1 x 3387134 dryer thermostat
2 x 3392519 dryer temperature fuse
1 x 3977393 thermal fuse
8. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
Conclusion
By our suggestions above, we hope that you can found Heating Element Tape for you.Please don’t forget to share your experience by comment in this post. Thank you!
