The Best Evaporative Cooling Pump

0

We spent many hours on research to finding evaporative cooling pump, reading product features, product specifications for this guide. For those of you who wish to the best evaporative cooling pump, you should not miss this article. evaporative cooling pump coming in a variety of types but also different price range. The following is the top 9 evaporative cooling pump by our suggestions

680 reviews analysed
Rank
Product Name
Score

1. Frio Insulin Cooling Pump Wallet : Blue

Frio Insulin Cooling Pump Wallet : Blue

Feature

Description

Color:Blue

Frio’s keep insulin safe even in hot climates. Choose the product size that is right for you Pump-External dimensions: 120mm x 90mm (4.72 in x 3.54 in ) Suitable for Mini Med and Disitron pumps plus Innolet and Innova injection systems

2. Mavel Star 12 volt Small Mini Submersible Water Pump for Camping DIY Swamp Cooler PC Cpu Water Cooling Fountain Water Fall 63 GPH [Upgraded Version]

Mavel Star 12 volt Small Mini Submersible Water Pump for Camping DIY Swamp Cooler PC Cpu Water Cooling Fountain Water Fall 63 GPH [Upgraded Version]

Feature

Description

Size:Size#1

Important Tips:

Please add a filter to avod hair or dirts being clogged with in this pumps.
if our pump does not working properly, please try to open and clean it before sending back to us,thank you very much!

Specifications:

Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140°F
Item dimension: 51mm*34mm*42.7mm

Note:

1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;

3. Portacool Pump-CYC-3 Cyclone Replacement Pump, Fits 2000 and 3000 Evaporative Coolers, Model

Portacool Pump-CYC-3 Cyclone Replacement Pump, Fits 2000 and 3000 Evaporative Coolers, Model

Feature

Description

Size:1-(Pack)

Pump for Cyclone 1000, 3000 and 2000 Series Units.

4. Little Giant 540005 CP1-115 1/70 Horsepower Evaporative Cooler Pump

Little Giant 540005 CP1-115 1/70 Horsepower Evaporative Cooler Pump

Feature

Description

Product description

LITTLE GIANT EVAPORATIVE COOLER PUMPDesigned for reliability in recirculating applications as replacement units for orginal equipment. For use in evaporative coolers, displays, laboratories, water transfer and other applications.

  • Heavy Duty Concentric Fan-cooled Motor
  • Thermal Overload Protection
  • Corrosion-resistant One-piece Steel Motor Shaft
  • Universal Mounting Configurations
  • Moisture-proof Windings
  • Oversized Sleeve Bearings with Large Oil Reservoir
  • 90 Degree Barbed Elbow with Bleed-off
  • Low Pump Down and Recovery Levels
  • Grounded Plug
  • For coolers up to 6500 CFM
  • Flame Retardant Housing
  • Snap-off Volute Plate for Easy Cleaning
  • Mesh Debris Screen

Specifications :

  • Horsepower – 1/70
  • Flow – 25 – 250 GPH @ 1′
  • Cord Length – 3′
  • Shut Off – 9.5′
  • Voltage – 115/127
  • Hertz – 60
  • Amps – .9
  • Watts – 65
  • Weight – 2.5 Lbs.
  • Height – 9
  • Width – 4.5
  • Length – 4.5

From the Manufacturer

Designed for reliability in recirculating applications as replacement units for orginal equipment. For use in evaporative coolers, displays, laboratories, water transfer and other applications.

1/70 HP, 307 GPH at 1-Inch, 115/127V. Includes a 4-Feet power cord.

5. FRIO Insulin Cooling Pump Wallet – Burgundy – 1130PUMPBURG

FRIO Insulin Cooling Pump Wallet - Burgundy - 1130PUMPBURG

Feature

Description

Frio’s keep insulin safe even in hot climates. Choose the product size that is right for you Pump-External dimensions: 120mm x 90mm (4.72 in x 3.54 in ) Suitable for Mini Med and Disitron pumps plus Innolet and Innova injection systems

6. Little Giant 542005 CP3-115 1/30 Horsepower Evaporative Cooler Pump

Little Giant 542005 CP3-115 1/30 Horsepower Evaporative Cooler Pump

Feature

Description

Product description

Little Giant CP3-115 Automatic Evaporative Cooler Pump with 1/30 HP, 115V and 4′ Power Cord (542005)Designed for reliability in recirculating applications as replacement units for original equipment. For use in evaporative coolers, displays, laboratories, water transfer and other applications.Little Giant CP3-115 Automatic Evaporative Cooler Pump with 1/30 HP, 115V and 4′ Power Cord (542005) Features: Heavy Duty Concentric Fan-cooled Motor Thermal Overload Protection Corrosion-resistant One-piece Steel Motor Shaft Universal Mounting Configurations Moisture-proof Windings Oversized Sleeve Bearings with Large Oil Reservoir 90 Degree Barbed Elbow with Bleed-off Low Pump Down and Recovery Levels Grounded Plug Flame Retardant Housing Snap-off Volute Plate for Easy Cleaning Mesh Debris Screen UR ListedLittle Giant CP3-115 Automatic Evaporative Cooler Pump with 1/30 HP, 115V and 4′ Power Cord (542005) Specifications: Flow: 563 GPH @ 1′ Cord Length: 4′ Shut Off: 12′ Voltage: 115 Hertz: 60 Amps: 1.2 Watts: 95 Weight: 3.5 lbs. Height: 9″ Width: 4.5″ Length: 4.5″

From the Manufacturer

Designed for reliability in recirculating applications as replacement units for orginal equipment. For use in evaporative coolers, displays, laboratories, water transfer and other applications.

1/30 HP, 563 GPH at 1-Inch, 115V. Includes a 4-Feet power cord.

7. Little giant 541005 CP2-115 1/50 Horsepower Evaporative Cooler Pump

Little giant 541005 CP2-115 1/50 Horsepower Evaporative Cooler Pump

Feature

Description

Product description

For residential and commercial cooler applications. Corrosion-resistant, one-piece steel motor shaft. Snap-off volute for easy cleaning. Polyester impeller. Heavy-duty fan-cooled motor with oversized sleeve bearings, moisture-proof windings. 90° barbed elbow has bleed-off allowing water to drain outside of unit. Elbow permits use of 5/8″” and 3/4″” I.D. tubing. Mesh debris screen. Has 4′ power cord with 3-prong plug

From the Manufacturer

Designed for reliability in recirculating applications as replacement units for orginal equipment. For use in evaporative coolers, displays, laboratories, water transfer and other applications.

1/50 HP, 502 GPH at 1-Inch, 115V. Includes a 4-Feet power cord.

8. Phoenix Manufacturing PDP12-1 Automatic Programmable Drain Pump, Compatible with Any Evaporative Cooler

Phoenix Manufacturing PDP12-1 Automatic Programmable Drain Pump, Compatible with Any Evaporative Cooler

Feature

Description

Product Description

Phoenix Manufacturing PDP12-1 Automatic Programmable Drain Pump, Compatible with Any Evaporative Cooler. Until now the best means of keeping your cooler clean was to use a “bleed-off” system, which simply drains off a percentage of water as the cooler operates. Today, by replacing the “bleed-off” with the innovative Automatic Programmable Drain Pump (PDP) by Phoenix Manufacturing, you can save as much as 3000 gallons of water per month – enough to fill a standard swimming pool – in just one cooling season! That translates into real dollar savings while conserving a substantial amount of water (as much as 80%). Our PDP12-1 will function with any manufacturer’s evaporative cooler, but because of PMI’s low sump pump technology, the PDP12-1 performs best with PMI products. Features and benefits; the PDP12-1 has easy plug-in installation, prevents mineral build-up, reduces bacterial growth, extends pad life, reduces maintenance, improves efficiency, and eliminates chemical additives and cleaners. With the PDP12-1 installed, it will automatically provide fresh water to your evaporative air cooler every 2, 4, 6, or 8 hours (based on your settings). Full 2-year warranty and U/L recognized U.S. Patent# 5,527,15.

From the Manufacturer

Phoenix Manufacturing PDP12-1 Automatic Programmable Drain Pump, Compatible with Any Evaporative Cooler. Until now the best means of keeping your cooler clean was to use a “bleed-off” system, which simply drains off a percentage of water as the cooler operates. Today, by replacing the “bleed-off” with the innovative Automatic Programmable Drain Pump (PDP) by Phoenix Manufacturing, you can save as much as 3000 gallons of water per month – enough to fill a standard swimming pool – in just one cooling season! That translates into real dollar savings while conserving a substantial amount of water (as much as 80%). Our PDP12-1 will function with any manufacturer’s evaporative cooler, but because of PMI’s low sump pump technology, the PDP12-1 performs best with PMI products. Features and benefits; the PDP12-1 has easy plug-in installation, prevents mineral build-up, reduces bacterial growth, extends pad life, reduces maintenance, improves efficiency, and eliminates chemical additives and cleaners. With the PDP12-1 installed, it will automatically provide fresh water to your evaporative air cooler every 2, 4, 6, or 8 hours (based on your settings). Full 2-year warranty and U/L recognized U.S. Patent# 5,527,15.

9. Dial Manufacturing 1195 Concentric Pump

Dial Manufacturing 1195 Concentric Pump

Feature

Description

115V, 11,000 cfm, concentric pump, fits mounting bracket in champion coolers grounded plug flame Retardant motor housing auto reset thermal overload, 420 gph low level pump, UL classified, 1 year warranty. The product is manufactured in china. Easy installation and easy handling.

Conclusion

By our suggestions above, we hope that you can found Evaporative Cooling Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general