Finding your suitable readers for dc cooling fan cable 2 pin is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for dc cooling fan cable 2 pin including detail information and customer reviews. Let’s find out which is your favorite one.
642 reviews analysed
1. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size: 40*40*10mm / 1.57*1.57*0.39in
- Speed: 6000RPM
- Noise: 27dBA
- DC12 / 24V
- Working Current: 0.06A / 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96W
- Cable length: Approx 28cm / 11in.
- ❃❃ Cable connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Great replacement item for your all metal hotends or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Package Including: 4 * 3D Printing Fan. Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. (Any questions, you can contact us and we will give you a satisfied solution!).
This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.
Rated Voltage: DC 12V
Consuming Current: 0.08A
Speed: 6000 + -10% RPM
Air Flow: 6.5 CFM
Static Pressure: 2.9
Noise Level: 27dBA
Note: Any questions, you can contact us and we will give you a satisfied solution!
Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.
2. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
3. CRJ Full Speed 12V Voltage Step-Up USB to Dual 3-Pin and 4-Pin PC Fan Sleeved Power Adapter Cable
- This USB Cable Allows You To Power Up To 2 Case Fans (Both 3-Pin And 4-Pin) From A USB Connection
- 12V Voltage Boost: Inside The USB Housing Is A Step-Up Circuit That Boosts The USB 5V To 12V Allowing PC Fans To Operate At Full Speed
- High Quality Construction Features Upgraded 22 AWG Power Wires And High Density Black Sleeving
- NOTE: Due To USB Port Current Limitations It Is Not Recommend Using Fans That Combined Require More Than 0.5 Amps At 12V
- Cable Length (Including Connectors): 22″ / 55cm
The CRJ Electronics USB fan cable line of products offers people a convenient way of powering PC fans with a standard USB port. Featuring an internal voltage step-up module you can power up to two 3-pin or 4-pin PC fans with 12V power for full speed operation. It is important to not exceed the current limitation of 0.5 Amps @ 12V (6W) which is a design limitation of conventional USB ports.
4. MakerFocus 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement
- Oil bearing 30000 hours
- Double roller bearing 50000 hours
- Certification: CE,UL,CUL
- Temperature of usage environment: -10℃ to +70℃
- Bearing is high precision, long life and low noise
- Size: 40 mm x 40 mm x 10 mm
- Working Voltage: DC 12V
- Working Current: 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96w
- Cable length: 280mm
4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement
Size: 40 mm x 40 mm x 10 mm;
Working Voltage: DC 12V;
Working Current: 0.08A;
Air Flow: 5.75±10% CFM;
Cable length: 280mm;
Oil bearing 30000 hours;Double roller bearing 50000 hours.
Temperature of usage environment: -10℃ to +70℃;
Bearing is high precision, long life and low noise
4 * DC 12V 0.08A 40X40X10mm 3D Printing Fan
5. Ruiling 2PCS 4010 12V 3D Printer Turbine Fan 40 4010mm DC Brushless Quiet Cooling Turbo Fan 2 Pin with 7.9In Dupont Wire
Type: 4010 fan
Wire Length: 20cm/7.9in
Rated Voltage: DC 12V
Rated Current: 0.11A+ -10%
Power consumption : 1.2W
Bearing Type: Sleeve/oil
Speed: 6500RPM+ -10%
Airflow: 7.2CFM+ -10%
Noise Level: 25dba+ -10%(quiet)
2* 12V Cooling fan
6. Fancasee 4-Pin PWM Fan Power Supply Cable 1 to 5 Splitter 5 Way PC Case Internal Motherboard Fan Power Extension Cable Cord Wire for ATX Computer Case 4-Pin and 3-Pin Cooling Fans (13 inch, Black)
- Excellent 1 to 5 splitter 5 way 4-pin PWM fan power supply extension cable cord, better power supply for PC computer case internal motherboard fans.
- Widely Compatible: support 4-pin and 3-pin fans cable, the 1 to 5 splitter 5 way fan power extension cable compatible with 4-pin and 3-pin PC case motherboard fans.
- Black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean & tidy.
- Plug-n-Play, easy to plug
- 5 way 4-pin male connector jack fan hub cable.
- The extension cable offers greater flexibility between motherboard and CPU cooling fans.
Excellent 1 to 5 splitter 5 way 4-pin PWM fan power supply extension cable cord, better power supply for PC computer case internal motherboard fans.
Support 4-pin and 3-pin fans cable, the 1 to 5 splitter 5 way fan power extension cable compatible with 4-pin and 3-pin PC case motherboard fans.
Plug-n-Play,Easy to plug; 5 way 4-pin male connector jack fan hub cable.
The extension cable offers greater flexibility between motherboard and CPU cooling fans.
7. URBEST 90mm x 25mm DC 12V 2Pin Cooling Fan for Computer Case CPU Cooler
Application to car seat, computer, electrical appliances, tools, machine, units, power supply, network equipment, office equipment, lighting, shoe ark, sanitary equipment children toys, supply of heat dissipation problems, reducing equipment working environment temperature, prolong the service life of equipment. The mounting screws are not included.
8. HIGHFINE 12cm 120mm 200CFM 4000RPM CPU Cooling Fan FFC1212DE 12V DC 3-Pin 3-Wire PC Computer High CFM Cooling Case Fan with Metal Finger Guard Grill
- Most Powerful of All 120mm Fans, Ultra Strong Monster, High Quality Long Life
- Model: FFC1212DE, Size: 120mm x 120mm x 38mm, Dual Ball Bearing, Speed: 4000 RPM, Air Flow: 200 CFM, Noise Level: 59dBA
- Power: 12VDC 3.0A 36W, 3-Wire 3-Pin Connector with Speed Sensor, Cable Length: 28cm, Weight: 400g(14 ounces)
- This super high-cfm-speed fan design for big pc or server CPU cooling component, also could be used for refresh air for your Underground Garage, Cellar or anyother space you want
- Package Includes: 1x High CFM Fan + 1x Metal Finger Guard Grill + 4x screws and nuts
This is an Ultra Strong and high flow rate DC Fan and you will be amazed by the amount of wind it blow!
Ideal for computer cooling system ,any other kinds of cooling or help your space be full of fresh air, and you won’t be disappointed.
Must be careful for the blades as it spins in very high speed!
This item provide a Silver Metal Grill on the fan back side for safety.
Bearing: 2 Ball
Max speed: 4000+/- 10% RPM
Noise Level(max): 59dBA
Power Connector: 3-pin 3-wire
Wire length： about 28cm
Rated Voltage: DC 12V
Operating Voltage Range: 7 – 13.2V
Input Current: 2.4A (3.0A max)
Input Power: 36W
FAN size: 120mm x 120mm x 38mm(4.725″ x 4.725″ x 1.5″)
Item weight: 400g (14 ounces)
1 x Ultra Strong 120mm Cooling Fan
1 x Silver Metal Grill
4 x screw and nuts
Note:I have to say it’s the MOST POWERFUL OF ALL 120mm FANS, a Monster of fans,super power of move a considerable amount of air.This fan is a little loudly when worked on. If you don’t need it too much power,you can add a Speed Controller by yourself,Instructions are not included however multiple videos are available on YouTube. We have many type of fans sell on amazon,if you have any questions about product,Pls contact us by email.
9. CRJ Female DC Power Supply Plug to PC Case Fan Power Adapter Cable
- Power A PC Case Fan WIth A Conventional Barrel Plug DC Power Supply
- Use A Variety Of DC Power Supplies To Control Desired Fan Speed (For Example: 5V For Silent, 12V For Full Speed)
- Input: Female 5.5mm OD x 2.1mm ID DC Plug Socket
- Output: 3/4-Pin Male Fan Connector (Specialized Fan Connector Is Compatible With Both 3-Pin And 4-Pin Fans)
- Cable Length (Excluding Connectors): 6″ / 15cm
By our suggestions above, we hope that you can found Dc Cooling Fan Cable 2 Pin for you.Please don’t forget to share your experience by comment in this post. Thank you!