Top 10 Cooling Only Digital Thermostat
We spent many hours on research to finding cooling only digital thermostat, reading product features, product specifications for this guide. For those of you who wish to the best cooling only digital thermostat, you should not miss this article. cooling only digital thermostat coming in a variety of types but also different price range. The following is the top 10 cooling only digital thermostat by our suggestions
524 reviews analysed
1. Century Digital Cooling Thermostat Controller for Cooling Device 40-108°F
- ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
- ✓ VARIETY OF USES: Our thermostat controller can be used for fans and ventilation. Max load 400w or 1000btu for refrigerators and ACs. Easily keep your various environments in their ideal temperature range. This product is NOT for HEATING products.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.
2. Emerson Sensi Wi-Fi Thermostat for Smart Home, DIY Version, Works with Alexa, Energy Star Certified
- Named the ‘Best Value’ smart thermostat of 2018 by USA Today’s Reviewed.com.
- SAVE ABOUT 23% ON HVAC ENERGY *: The ENERGY STAR certified Sensi thermostat helps you save on your HVAC energy costs, with features like geofencing, 7-day flexible scheduling, remote access and energy usage reports.
- GET REBATES: Find utility rebates in your area through the rebate finder at sensi.emerson.com/rebates
- MOST INSTALL IN 30 MINUTES OR LESS**: With step-by-step instructions and video tutorials right in the mobile app, most people install Sensi in 30 minutes or less.
- EXTENSIVE COMPATIBILITY***: Works with the HVAC equipment found in most homes – a c-wire is required for heat-only, cool-only and heat pump systems without aux. To check system and router compatibility, refer to our online compatibility resources at sensi.emerson.com/compatibility
- SMART HOME COMPATIBLE: Works with Amazon Alexa, Google Assistant, Apple HomeKit (c-wire required) and Wink smart home platforms.
- CONTROL FROM ANYWHERE: Remotely control your home comfort from your smartphone or tablet using the free Sensi mobile app for Android and iOS devices.
- SMART ALERTS: Sensi features smart alerts to help detect extreme temperature and humidity levels in your home.
3. Poniie TC-15A Digital Temperature Controller 2-Stage Outlet Thermostat Heating & Cooling Mode for Greenhouse, Terrarium, Brewing and Fermentation (110V 15A)
- CONVENIENT DESIGN: Pre-wired plug and play design, easy to program, high accuracy waterproof sensor, support °C/°F display
- DUAL RELAY OUTPUT: Be able to connect with heating and cooling loads at the same time with control range (-40~210℉)
- DUAL DISPLAY WINDOW: Be able to display measured temperature and set centering temperature at the same time
- CALIBRATION & PROTECTION: Be able to calibrate temperature and set delay to protect your refrigerator from cycling too fast
- BUY WITH CONFIDENCE: 1-YEAR Warranty
- MAX. 1650W (110V)
- Over temperature & faulty sensor alarm, with power off memory
4. Emerson NP110 Non-Programmable Single Stage Thermostat
5. Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Control Mode:On/Off Control,Heating and Cooling
Temperature Control Output:Max.10A,100V ~240VAC
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
6. Lux Products TX9600TS Programmable Large Touchscreen Heating Cooling Thermostat, White
- Universal compatibility for all system types. Large, lighted easy-to-read touchscreen display. It is compatible with virtually all North American heating and cooling systems apart from systems with electric baseboard heat (120 or 240 volt) and systems with 2-cooling stages
- Biggest size display, Easy-to-use touchscreen menu operation.
- User-selectable periods per day (2 or 4), Programmable touch pad lockout for unauthorized users
- Adjustable heat/cool set temperature limit stops, Energy usage monitor. Refer user manual below
- Programmable air filter life timer, Temporary temperature override, Adjustable temperature differential (swing).
About the lux TX9600TS Thermostat, 7 day digital programmable universal touch screen The lux TX9600TS Thermostat, 7 day digital programmable universal touch screen is simple and easy to understand making it extremely user friendly. This thermostat provides you with complete and accurate temperature control with just a simple touch of your finger. The lux TX9600TS features a large digital lighted display that makes the touch screen easy to read and program (7 day programming available). The lux TX9600TS Thermostat, 7 day digital programmable universal touch screen is designed for use with most 24 volt heating and A/C systems, two stage heat/ one stage cool (gas, oil, Electric, or single stage heat pump systems, two wire heat only hydronic systems (hot water baseboard & Radiator) and millivolt systems (wall heaters, furnaces & Gas fireplaces). The lux TX9600TS is not designed for use with electric baseboard heat (120\240 volt) and systems with 2-cooling stages.
7. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
1x ITC-308 Temperature Controller
8. DIGITEN Digital Thermostat Outlet Controller Switch Simple-Stage Plug LCD Temperature Control Heating or Cooling
9. Honeywell Home 5-2 Day Programmable Thermostat (RTH2300B1038/E1)
The thermostat for low volt with high expectations for performance. You like the idea of a thermostat you can program for weekdays and weekends, but you have a low volt heating and cooling system. This 5-2 Day Programmable Thermostat is for you. It’s compatible with several types of low volt heating/cooling systems. Plus, it comes with features like weekday/weekend programming and a backlit display for easy operation.
10. Honeywell RTH6360D1002/E Programmable Thermostat, 5-2 Schedule
- Compatible with 2 heat 2 cool conventional systems and 2 heat 1 cool heat pump systems. This thermostat is not compatible with electric baseboard heat (120-240 volts)
- 5-2 scheduling lets you create unique weekday and weekend programs, or schedule the entire 7-day week the same. And your program is retained in the thermostat in the event of a power outage
- Smart alerts provide change reminders for air filters and low batteries in your thermostat. (This thermostat requires 2 AA batteries which are not included)
The product is easy to use. The product is highly durable and handle. The product is manufactured in china.
By our suggestions above, we hope that you can found Cooling Only Digital Thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!