903 reviews analysed
1. Semoic 2000W 50A ZVS Induction Heating Board Heater Module Flyback Driver Heater Dissipation Coil Dual Fan with Copper Tube
- You must pay attention to when using switch power supply,because the high-power switching power supply usually have soft start function,namely the output voltage is slowly rising,and if the voltage rise to 10V before connected induction heating circuit will be caused by lacking voltage lead to circuit can’t afford to vibrate,so the two MOS tube conduction and burned components at the same time,so be sure to switch the power supply voltage stability and then access the induction heating circuit.
- Package comes with heating circle diameter is 60 mm, design voltage is 36V, if you use more than 40 voltage power supply shall be used for inner diameter 70 mm above diameter heating ring, water pump use 12V dc power supply, please use separate power supply voltage regulator module to avoid burn out fan and water pump.If you find that the MOS tube fever, then the first thing to consider whether the power output meets the requirements.
- Note:The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. The buyer can prepare water cooling system separately, can buy a small water pump and 2 meters of inner diameter of 4mm rubber hose.
- When heating the metal objects do not to heat too large metal, otherwise it may be overloaded with power, please add a 35A fuse or ammeter and air switch will be better. (package does not inclues).Although this drive plate can withstand more than 40A current, but it is recommended that not exceed 48V 35A to prevent accidents and damage.Do not empty the board, otherwise it will issue a very high frequency of noise, and then MOS tube will burn out
- The minimum input voltage of the module is 12V, it doesn’t mean all the 12V power supply can be used, some novice buyers may use a smaller power supply. This module has specific voltage and current requirements, the voltage 12V current must be more than 10A power supply can be used, if the power is too low will lead to the power output is greatly reduced, when the voltage is lower than 12V, it will lead to two MOS at the same time conduction, will burn MOS tube
Semoic，a legal trade mark, has been registered. Only those who are authorized are available to sell items under Semoic. Semoic will bring you joyful shopping experience. Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small heating almost no response, and 12V power supply easily lead to the power supply output voltage decreases, below 12V is very dangerous
Induction heating power is great, so fever is normal, be sure to do a good job of cooling.
Induction heating, the power recommended more than 48V 50A switching power supply. More than 24V power supply, then more than 20A power supply, the greater the voltage, the greater the current, the greater the heating power, heating faster.
This products maximum power 2000W, adopted super PCB layout design and super heat sink, heat dissipation good, since with a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc.
This induction heating circuit uses 12-48V low voltage DC power supply, maximum current 40A, the most highest power is 2000W. It can work continuously under the condition of good heat dissipation.
Due to its moderate power, it can be used by DIY players to give smaller players the parts can be treated by quenching, annealing and other heat treatment. You can also be melted with graphite crucible Kim, Silver, Copper, aluminum and other metal, heating evenly, is fast and very convenient.
1 * 2000W ZVS heating plate
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2. 2500W Induction Heating Board DC 12V ZVS Induction Heating Board Flyback Driver Heater DIY High Frequency Induction Heating Machine Module with Spiral Coil and Water Pump
- The heating board is made of PCB, with stable performance.
- The power cord is completely covered with copper cover, which can increase current and calorific value.
- Use the large power supply of the radiator for better cooling.
- The output terminals use three M4 copper columns in parallel to connect to other outputs, such as the FBT.
- 6 IRFP260 and 12 parallel resonant capacitors are used for high power and efficiency.
Condition: 100% brand new
Item Type: Induction Heating Board
Color: as picture shown
Pump input voltage: DC 12V
Input voltage: 12V-48V recommend 36 V
Power: 12 V: ≥ 10A, 15V: ≥ 20A
Maximum power: 2500W
Maximum current: 50A
1 x Induction Heating Board
1 x Spiral Tube
1 x Water Pump
3. AEEDAIRY Low ZVS 12-48V 20A 1000W Low Voltage Induction Heating Board High Frequency Induction Heating Machine Module
4. DC 12-40V 50A 1000W 1KW ZVS Low Voltage Induction Heating Machine Board Module High Frequency 1000W High Voltage Generator
- The item is good quality.Tested before shipping. Package reference weight:Weight:0.591kg (1.30lb.)
- we will test the product Before shipping.Estimated Delivery Time: 6-24 days(trackable)—– We provide Expedited Shipping service : 2-7 days.(excluding handling time).If the order amount above US $120, we will use Expedited Shipping service for free.
- We are a professional distributor of electronic components. We also sell other kinds of products. just search the model number in our store.
- We make every effort to provide customers with satisfactory service.any question,please feel free to contact me.
Reference Weight:0.591kg (1.30lb.)
Features: PCB board size: 165.1 * 112.41 * 1.6mm Input voltage DC 12V ~ 40V Maximum input current 50A (short) Recommended Input voltage range DC 24V ~ 36V When used in heating supply power must be large enough! 24V power above the recommended maximum current of 20A 12V power supply maximum current must be more than 10A. Package Contents: 100% Brand New (High Quality) 1x 50A/1000w ZVS induction heating machine product voltage
5. DC 12-40V 50A 1KW ZVS Low Voltage Induction Heating Board High Frequency 1000W High Voltage Generator for Melt Metals
- 100% Brand new and High quality.
- 85% conventional orders will be delivered within 7-18days.Some remote countries will take longer.We provide DHL expedited service. The time limit is 3-7 days. (Excluding preparation time.) If the order amount is more than 150, we will use the DHL service free of charge.
- We offer tens of thousands of electronic accessories and modules. You just need to search for keywords in my store.
- If the packages not be delivered on time or the products may not be satisfactory. You just need to send a refund request, we will full refund for you without asking.
- We make every effort to provide customers with satisfactory service.
PCB board size: 165.1 * 112.41 * 1.6mm
Input voltage DC 12V ~ 40V
Maximum input current 50A (short)
Recommended Input voltage range DC 24V ~ 36V
When used in heating supply power must be large enough!
24V power above the recommended maximum current of 20A
12V power supply maximum current must be more than 10A.
100% Brand New (High Quality)
1x 50A/1000w ZVS induction heating machine product voltage
6. CGOLDENWALL 2500W ZVS Induction Heater Induction Heating PCB Board Heating Machine Melted Metal with Coil Crucible Power Supply
- The heating plate is made of 240*120mm military grade PCB, and the performance is stable
- The power line is fully covered with copper cover design, which can increase current and generate less heat
- Using an oversized and large power heat sink, the heat dissipation is better
- The output uses three M4 copper columns in parallel, which can be connected to other outputs such as high voltage packages
- Six IRFP260 and 12 capacitors are used in parallel resonance, which has high power efficiency
Product size: 120mm * 240mm
Input voltage: 12V-48 recommended above 36V
Power requirements: less than 12V ≥ 10A 15V or more ≥ 20A
Maximum power: 2500W
Maximum current: 50A
For induction heating, it is recommended to use a switching power supply of 48V50A or higher. If the power supply is 24V or more, a power supply of 20A or more is required. The higher the voltage, the larger the current, the higher the heating power, the faster the heating speed.
1 x power supply
1 x PCB Board
1 x 48V Copper Tube
1x water pump
1 x crucible（57×87mm）
Something Buyers must see / pay special attention
 The power of induction heating is very large. In addition to the heat generated by the board and components, the heat generated by the copper tube is also very large. Buyers can bring their own water-cooled cooling system. You can buy a small water pump and a rubber hose with an inner diameter of 4mm or 2m. You can also purchase a matching water pump in the package.
 The heating coil of the package has a diameter of 60mm and a design voltage of 86V. If a voltage of 40V or more is used, the heating coil with an inner diameter of 60mm or more must be used. The pump uses a 12V DC power supply. Please use the voltage regulator module to supply power separately to avoid burning the fan. Water pump.
 For induction heating, the copper tube in the package of this product should be used, or it should be wound according to the standard of 10 mm inner diameter of 60mm. Otherwise, the buyer will bear the responsibility for any burning problem.
 This heating module is designed to be used in environments above 2000W. If the working power is low, you can purchase the 1800W induction heating machine.
Thank you for your trust in our products and services! If there are any after-sales problems, please tell us to solve them in time
7. QX Electronics 1PCS 5~12v ZVS Induction Heating Power Supply Module Tesla Jacob’s Ladder + Coil
By our suggestions above, we hope that you can found 50A Zvs Induction Heating for you.Please don’t forget to share your experience by comment in this post. Thank you!